Fence Repair Houston TX — Iron, Metal & Security Fencing
Rampart Welding repairs iron, metal, and security fencing across Houston — bent panels, broken welds, rusted-through sections, and leaning posts. We weld repairs in-house and match the existing fence, so a damaged section is restored, not just patched. Call (713) 816-5880.
A damaged metal fence is a security and curb-appeal problem. Whether a vehicle hit a panel, welds cracked, or Houston humidity rusted a section through, we weld the repair on-site and match it to your existing fence line.
Fence Repairs We Do
Metal and iron fencing, residential and commercial.
- Bent or damaged fence panels
- Broken welds and cracked joints
- Rusted-through sections replaced
- Leaning or shifted fence posts
- Vehicle-impact damage repaired
- Matching new sections fabricated
What Fence Damage Do You Repair in Houston?
Vehicle & Impact Damage
A car backing into a fence bends panels and snaps posts. We straighten or replace the damaged section, re-weld the connections, and match it to the existing fence so the repair blends in.
Rust & Corrosion
Houston humidity rusts metal fencing, especially near the ground and at welds. We cut out rusted-through sections, weld in new matched material, and finish it to resist future corrosion.
Leaning & Shifted Posts
Clay-soil movement leans fence posts just like gate posts. We reset posts with proper footings and re-plumb the fence line so it stands straight again.
Can You Repair Just a Section or Do I Need a Whole New Fence?
Almost always just the section. Because we weld and fabricate in-house, we repair or rebuild the damaged portion and match it to your existing fence — far cheaper than full replacement. We only recommend more when the fence is failing along its whole length.
A single damaged section doesn't mean a new fence. We fabricate matching panels and pickets, weld them into the existing line, and finish the repair so it's hard to tell where the damage was. This is the advantage of using a welding shop rather than a fence-panel reseller.
- Damaged section assessed against the rest of the fence
- Matching panels and pickets fabricated in-house
- Repair welded into the existing line
- Finished to match and resist Houston humidity
Diagnostic & Service Pricing
Free estimates for structural repairs and new installations. Flat diagnostic fee for opener and electronic troubleshooting.
Fence repairs are quoted with a free estimate — no diagnostic fee, since this is structural fabrication work. We provide a written quote covering materials and labor before starting.
| Service Type | Fee |
|---|---|
| New gate, fence, or opener installation estimate | Free |
| Structural repair — hinges, welds, frame, post, misalignment | Free estimate |
| Gate opener / electronic diagnostic | $175 |
| Simple reset, limit adjustment, or minor correction — no parts | $175 covers it |
| Repair quote approved — diagnostic credited to total | $175 applied |
| Repair quote declined | $175 due |
| Commercial / HOA / apartment opener diagnostic | $250 |
| After-hours / emergency response | $250+ |
The clean offer: Free estimates for new installs and structural repairs. $175 diagnostic for opener and electronic troubleshooting — credited toward your repair if you approve the work. No surprise charges. Written quote before we touch anything. All work done in-house.
Fence Repair Houston TX — Iron, Metal & Security Fencing — Frequently Asked Questions
What types of fences do you repair?
We repair iron, metal, and security fencing — the fence types that involve welding and metal fabrication. That includes ornamental iron, tubular steel, and commercial security fencing, on both residential and commercial Houston properties.
Can you repair just a damaged section of fence?
Almost always, yes. Because we fabricate in-house, we repair or rebuild just the damaged section and match it to your existing fence, which is far cheaper than full replacement. We only recommend more when the fence is failing along its whole length.
My fence post is leaning — can you fix it?
Yes. Houston's clay soil leans fence posts the same way it shifts gate posts. We reset the post with a proper footing and re-plumb the fence line so it stands straight again, rather than just propping it up temporarily.
Do you repair vehicle damage to metal fences?
Yes. Vehicle impacts are a common fence repair — we straighten or replace bent panels and snapped posts, re-weld the connections, and match the repair to the existing fence. We can also provide documentation for insurance claims.
What does fence repair cost in Houston?
Fence repairs are quoted with a free estimate since they're structural fabrication work with no electronic diagnostic. Cost depends on the damage extent and materials, and you get a written quote before we start.
Related Services
Wrought Iron Fence Houston
Custom iron fence fabrication and installation.
Powder Coated Metal Fence Houston
Rust-resistant metal fencing.
Gate Welding Repair Houston
Mobile structural welding for gates.
Custom Gate Fabrication Houston
Matching custom gates for your fence.
Wrought Iron Gates Houston
Ornamental iron gates.
Gate Repair Houston
Full-spectrum gate and fence services.
Damaged Fence? Call Rampart.
Iron and metal fence repair, welded in-house and matched to your existing line.
Free fence repair estimate across Houston and Fort Bend County.
(713) 816-5880"Promptly returned my text. Arrived on time and completed repairs to my satisfaction. Rampart is now my first call for gate and opener repair."
"Luis was quick to respond and work was done at a more affordable price than anywhere else we quoted. Patient and friendly. Will call them back!"
"Luis was prompt in providing an accurate estimate, ordered the necessary parts, and installed immediately. 5-star company!"